The doors of the barn evoke the picturesque countryside. You can capture that aspect in your barn installing strips of classic hinges. These support the weight of the barn doors and come in a wide variety of traditional decorative styles. This design makes the hinge hanging barn door track is a less daunting task. It measures up to 30.5 cm from the threshold along the hinge side of the door frame of the barn and down 12 inches from the top of the door frame with a tape measure. Mark each measure under the door with a pencil.
Screw the end of a lag screw pivots under the door on each pencil mark turning clockwise until they enter fully into the hinge side of the door frame. Hold the barn door in the opening frame it. Marks the location of the pins on the hinge side of the door with a pencil. Place the barn door on a work surface with the outer side facing up.
Place the included mounting screws through the mounting holes in the strip hinges on the door with an electric screwdriver. Keep the door in the opening. Strip aligns with the pivot hinge under the barn door. Hinges placed on pivots so that the door rests on the whole.
Installing Barn Door Track
Installing barn door track sliding requires the use of a car (a railway system that transports or door moves side to side) and several rollers running along this track.. With a little help from your friends, you can add sliding doors to their new barn easily accessible. Depending on the mounting kit you buy, its sliding doors must be in place very quickly. Purchase a mounting kit to door to the door of his barn. Either buy ready-made doors in the correct size or buy materials to make doors.
Barn door track, place the mounting board in place. It should be slightly longer than the rails of the doors. Firmly nailed to the beams inside the pole barn. The mounting board has a lot of weight, so make sure it can withstand the door. Follow the manufacturer’s instructions for mounting the door track. Attach any support that comes with the track. Use the level to mark a straight line, where the door track must be on the table assembly.
Barn door track, slip on your safety glasses. Use the punch to pre-drill holes in the mounting plate to secure the door track instead. Drill holes and attach the rails of the doors to the mounting plate. Be sure to use all the spacers and supports that come with the kit.
Barn Door Track Design
Sliding barn door track can add a realistic touch any shed. The backbone of these doors is rails and rollers connecting the doors to the structure and allows them to slide freely. Most people can install rails and rollers for these gates in a few hours. Doubles the size of the width of the door opening to determine the required length of rail. Cut the rail to length using a hacksaw or reciprocating saw equipped with a blade for cutting metal.
Determines the style mounting barn door track. It can be mounted with clips that come with the kit or screwed through eyebrows that are welded to the top of the rail. If you come with clips, simply slide them on the rail through the ends and espacialos evenly.
Lane mounted on the wall using screws provided with the bottom barn door track three inches above the top of the door opening. Make sure the rail is level. Choose which side of the opening of the door will slide mounts and pairing it with the other side rail. Place the door on the floor and face down. Rollers placed between one and two inches (2.5 to 5 cm) below the top edge of the door.