Make Wood Coffee Table


Wood Coffee Table – A good project to start is to build a table, but only after you have built a simple box with gaskets and set of shelves for storage. Comprising the parts that make up a table of any kind.  It begins with the board. The board easier to plywood is 0.19 cm (0.75 inches). Plywood can have one side with a finish of almost any coating you choose, from pine to mahogany or cherry.

Cut the plywood to size and shape you need. Most wood coffee table are rectangular. The edge should be wider than the plywood. Make skirts using cut to the size you need wood. The dimensions discussed below are general measures. Using a timber of 2.5 x 10.2 cm (1 x 4 inches) or 2.5 x 14.6 cm (1 x 6 inches). Discard takes wooden pieces approximately 2.5 x 5.1 x 14.6 cm (1 x 2 x 6 inches) and screw them on the inside of the skirt.

Make the legs of any material you choose. more common for this project The poles are made ​​of pine untreated 6.2 x 6.2 cm (4 x 4 inch) cut to the length you chose for height table less the thickness of the board. Legs adheres to every corner of the skirts. The safest way is to screw them using self-tapping screws. Place the wood coffee table face up and place the center at the bottom skirt with attached legs. Emery paper surfaces with progressively finer sandpaper, starting with 120 grit and finishing with 220 grit. Apply a natural finish, which is particularly nice if you have a good grain pattern.

Leave A Reply